IMPORTANT NOTE BEFORE GIVING BAD REVIEW:
If you download and can't open or app didn't properly download, its your phone or Google Play Error (sometimes storage full/or phone outdated), Restart and do again.
If you can Run the App but can't connect, Its your network problem, make sure your LTE/4G off before connect to the WiFi Router where the ATEM Connected to.
If you can Run and connect but delayed, its your router or network configuration, worst case: your phone needs to update.
If you can Run and connect but didn't get any response or connection, then its the app problem.
Now you can control your BMD ATEM Switchers with this app. And yes, its the basic features (for now, will continuously update).
Main features:
- Well, Its smartphone app, so its Wireless Controller.
- Selectable input Active and Preview (4, 6, 8, 10 Channels),
- Support Cut, Auto and transition selections (Dip, Wipe, Mix, DVE)
- Can works on any Android Smartphones, Tablets, and also Android TV.
Or you can also use this app as Tally monitor.
Warning:
Choose the Channel based on your Switcher:
ATEM Mini Series for 4 Inputs
OLD TVS Series for 6 Inputs
ATEM MINI EXTREME/TVS HD for 8 Inputs
ATEM CONSTELLATION for 10 Inputs
If you Choosing 10 Inputs for 4 Input switcher and accidentally press the 5 - 10, you will freeze the app. Its not bug, just disconnect and choose the right Panel and Connect again!
Make sure you are connecting to the same WiFi network, input switcher ip address, and you good to go. for some occasion, you need to disable the gsm/LTE/4g/5G network to avoid ip conflict before open the App.
Note: ATEM™ brand name and logo/switcher image are trademarks belongs to BLACKMAGIC DESIGN™ . This app are not official product of BLACKMAGICDESIGN™, its just alternative tool app.
