AlfaOBD software for diagnostics of the vehicles produced by Stellantis (former FCA): Alfa-Romeo, Fiat, Lancia, Dodge, RAM, Chrysler, Jeep. Peugeot Boxer and Citroen Jumper are also supported. Although the software is primarily targeted for the car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available.
NOTE: FCA vehicles since MY2018 have security gateway module (SGW) installed. It blocks the third-party diagnostics. To have full access to the diagnostic features, please use an SGW bypass. Owners of Fiat 500X/JEEP Renegade/Compass (MP), please make sure that the bypass supports the second high-speed CAN bus, the one that is connected to the pins 12&13 of the car OBD plug.
NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.
Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.
NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.
For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf
AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- electronic key and RF remote control programming
For the full list of supported control units visit http://www.alfaobd.com
Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via application Settings menu.
NOTE: If plots are not updated, make sure that "Force GPU rendering" is off in "Settings"->"Developer Option".
